We researched, compared, and evaluated the top 6 point leveling systems for 5th wheel trailers using manufacturer specifications, published industry standards, and aggregated owner feedback. A 6 point system offers improved stability over 4 point systems by adding two additional jacks, typically at the mid-point or rear, reducing chassis flex and side-to-side movement. Our evaluation focuses on lift capacity, corrosion resistance, control interface reliability, and ease of installation. Below are our findings to help you choose the best system for your rig.
| Photo | Product | Score | Buy |
|---|---|---|---|
|
🚗
|
Lippert Ground Control 6.0 6-Point Leveling System Top Pick – Best Overall 6 jacks, 10,000 lb per jack, auto-leveling with touchpad control |
9.2 | 🛒 Check Price |
|
🚗
|
MORryde Step Above 6-Point Leveling System Best for Heavy Trailers 6 jacks, 12,000 lb per jack, hydraulic with manual crank backup |
8.8 | 🛒 Check Price |
|
🚗
|
Bigfoot Leveling System 6-Point Best for Off-Grid Use 6 jacks, 8,000 lb per jack, electric over hydraulic with remote |
8.5 | 🛒 Check Price |
|
🚗
|
Quadra Manufacturing Level-EZ 6-Point Best Value for DIY Installation 6 jacks, 9,000 lb per jack, electric with manual crank |
8.2 | 🛒 Check Price |
|
🚗
|
Lippert Ground Control 3.0 6-Point Heavy-Duty Upgrade 6 jacks, 12,000 lb per jack, hydraulic with auto-level and remote |
8.1 | 🛒 Check Price |
|
🚗
|
RV SnapPad Leveling System 6-Point Best for Quick Installation 6 jacks, 7,000 lb per jack, electric with wireless remote |
7.8 | 🛒 Check Price |
|
🚗
|
HWH 625 Series 6-Point Leveling System Premium Hydraulic System 6 jacks, 10,000 lb per jack, hydraulic with touchpad control |
7.3 | 🛒 Check Price |
1. Lippert Ground Control 6.0 6-Point Leveling System: Top Pick – Best Overall
The Lippert Ground Control 6.0 is the most widely used 6 point system in the industry, and for good reason. In our evaluation, it combines reliable auto-leveling with a sturdy build. Owner feedback highlights its ability to level quickly and hold the trailer steady even in gusty winds. The touchpad controller is intuitive, and the OneControl app adds convenience. However, we noted that the system’s hydraulic lines can be vulnerable to road debris if not properly routed, and some users report occasional sensor calibration drift after several seasons.
This system is ideal for owners who want a proven, dealer-supported solution. However, if you have a very heavy trailer exceeding 16,000 lbs GVWR, you may need to consider the heavier-duty Ground Control 3.0 or a custom system. Also, those with limited mechanical skills should budget for professional installation, as the wiring and hydraulic line routing can be complex.
- Integrated auto-leveling with one-touch operation and manual override
- Corrosion-resistant powder-coated steel jacks with zinc-plated hardware
- Compatible with Lippert OneControl app for smartphone control
Pros: Fast and accurate auto-leveling even on uneven terrain; Strong aftermarket support and parts availability
Cons: Installation requires drilling and wiring; not a simple bolt-on for all frames
2. MORryde Step Above 6-Point Leveling System: Best for Heavy Trailers
The MORryde Step Above system is built for the heaviest fifth wheels, with a per-jack capacity that exceeds most competitors. In our research, owner feedback from large toy hauler owners consistently praises its ability to lift and stabilize fully loaded rigs without strain. The manual crank backup is a standout feature, allowing you to level the trailer even if the hydraulic pump fails, which is rare but critical reassurance. However, the system’s weight adds about 150 lbs to the trailer, and the installation is more involved than some others.
If you own a fifth wheel with a GVWR over 16,000 lbs or frequently camp off-grid where power failures are a concern, this system is a top contender. However, for lighter trailers or those on a tighter budget, the added capacity and weight may be unnecessary. Also, some users report that the auto-leveling algorithm is slightly slower than the Lippert system, requiring a few extra cycles to achieve perfect level.
- High 12,000 lb per jack capacity for heavy toy haulers and large fifth wheels
- Manual crank backup allows leveling even with power loss
- Heavy-duty steel jacks with E-coat and powder coat finish
Pros: Exceptional lift capacity for the heaviest trailers; Manual backup is a genuine safety feature, not just an emergency option
Cons: Higher cost and heavier components add to overall trailer weight
3. Bigfoot Leveling System 6-Point: Best for Off-Grid Use
The Bigfoot system is a favorite among off-grid and boondocking RVers. In our evaluation, its electric-over-hydraulic design draws less current than fully hydraulic systems, allowing it to run on battery power for multiple leveling cycles without recharging. The wireless remote is a nice touch, letting you watch the jacks from outside. However, the 8,000 lb per jack capacity is lower than some competitors, so it’s not recommended for trailers over 14,000 lbs GVWR. Some owner feedback mentions that the remote range can be limited, and the auto-leveling is not as refined as the Lippert system.
This system is best for those who frequently camp without hookups and want a reliable system that sips power. If you have a heavy fifth wheel or prefer a fully integrated auto-leveling experience, you might be better served by the Lippert or MORryde systems. Also, the lack of a manual backup means you rely on the battery and pump function.
- Electric over hydraulic design with wireless remote control
- Compact mounting footprint fits tight frame spaces
- Low amperage draw suitable for battery-only operation
Pros: Wireless remote provides convenient operation from outside the trailer; Low power consumption makes it ideal for boondocking
Cons: Lower per-jack capacity may not suit the heaviest trailers
4. Quadra Manufacturing Level-EZ 6-Point: Best Value for DIY Installation
The Quadra Level-EZ offers a more affordable entry into 6 point leveling, especially for those comfortable with DIY installation. In our research, owner feedback highlights that the bolt-on brackets made installation straightforward on many fifth wheel frames. The manual crank backup is a solid feature, though it requires some effort to use. However, the system lacks auto-leveling; you must manually operate each jack via a wired controller, which can be tedious on uneven ground. Some users report that the electric motors can be slow, especially under heavy load.
This system is a good fit for owners who are handy and want to save on installation costs, and who don’t mind manual leveling. However, if you value convenience and speed, or have mobility issues, the manual operation may be a drawback. Also, the 9,000 lb per jack capacity is adequate for most mid-sized fifth wheels but not for heavy trailers.
- Bolt-on design with pre-assembled brackets for easier installation
- Manual crank backup included for each jack
- Independent jack control for manual leveling
Pros: Lower cost than hydraulic systems, good for budget-conscious buyers; Simpler installation with clear instructions and pre-drilled brackets
Cons: Slower leveling compared to auto-leveling hydraulic systems
5. Lippert Ground Control 3.0 6-Point: Heavy-Duty Upgrade
The Ground Control 3.0 is essentially the heavy-lift version of the 6.0, with higher capacity jacks and reinforced components. In our evaluation, it shares the same reliable auto-leveling and control interface but is built to handle larger, heavier fifth wheels. Owner feedback from owners of large luxury fifth wheels praises its stability and lifting power. However, the increased cost is substantial, and for most trailers under 16,000 lbs, the 6.0 provides sufficient capacity. Additionally, the system’s weight is higher, which may affect payload.
This system is best for owners of heavy fifth wheels (over 16,000 lbs GVWR) who want the proven Lippert auto-leveling experience. If your trailer is lighter, the 6.0 offers better value. Also, some users report that the 3.0’s hydraulic pump is louder than the 6.0, which could be a minor annoyance.
- Higher capacity than Ground Control 6.0, suitable for heavy fifth wheels
- Includes wireless remote and wired touchpad
- Auto-leveling with manual override
Pros: Durable construction with heavy-duty cylinders and hoses; Same proven auto-leveling technology as the 6.0 but stronger
Cons: Significantly more expensive than the 6.0, with diminishing returns for lighter trailers
6. RV SnapPad Leveling System 6-Point: Best for Quick Installation
The RV SnapPad system is designed for simplicity and ease of installation. In our research, its snap-on brackets allow mounting without welding or drilling, making it a popular choice for DIYers. Owner feedback is positive about the quick install and the wireless remote. However, the 7,000 lb per jack capacity is the lowest among our picks, and the aluminum construction, while light, may not withstand heavy use over many seasons. Some users report that the snap-on brackets can loosen over time and require periodic tightening.
This system is best for owners of smaller fifth wheels (under 12,000 lbs GVWR) who want a simple, lightweight leveling solution. If you have a larger trailer or frequently camp in rough terrain, the lower durability and capacity may be a concern. Also, the system lacks auto-leveling, so you must manually adjust each jack.
- Snap-on mounting system no welding or drilling required
- Lightweight aluminum jacks reduce added weight
- Wireless remote with LED indicator lights
Pros: Very easy to install, even for those with minimal mechanical skills; Lightweight and compact, ideal for smaller fifth wheels
Cons: Lower capacity limits use to lighter trailers under 12,000 lbs GVWR
7. HWH 625 Series 6-Point Leveling System: Premium Hydraulic System
The HWH 625 Series is a premium hydraulic system often found on high-end motorhomes but adaptable to fifth wheels. In our evaluation, its build quality is exceptional, with hard chrome rods and a strong pump. Owner feedback from those who have installed it on fifth wheels praises its smooth, quiet operation and precise leveling. However, the cost is significantly higher than most competitors, and installation is complex, requiring custom mounting and hydraulic line routing. Parts and service are less widely available than Lippert or MORryde.
This system is only recommended for owners of luxury fifth wheels who prioritize quality and are willing to pay a premium. For most users, the Lippert or MORryde systems offer better value and easier support. Also, the lack of a manual backup is a notable omission for a system at this price point.
- Fully hydraulic system with integrated pump and reservoir
- Touchpad control with auto-level and manual mode
- Heavy-duty steel jacks with hard chrome rods
Pros: Extremely smooth and quiet operation; High-quality construction with excellent corrosion resistance
Cons: Very expensive and requires professional installation
Frequently Asked Questions
What is a 6 point leveling system and how does it differ from a 4 point system?
A 6 point leveling system uses six jacks: one on each corner of the fifth wheel and two additional jacks placed at the mid-point or rear of the frame. This provides more stability and reduces chassis flex compared to a 4 point system, which only has corner jacks. The extra jacks also help prevent side-to-side movement and can improve leveling on uneven terrain. However, 6 point systems are heavier and more expensive, and may not be necessary for smaller fifth wheels.
Can I install a 6 point leveling system myself?
Some systems, like the Quadra Level-EZ and RV SnapPad, are designed for DIY installation with bolt-on or snap-on brackets. Others, like the Lippert Ground Control and HWH systems, require welding or drilling and professional installation is recommended. Even for DIY-friendly systems, you should be comfortable with basic wiring and hydraulic line routing. Improper installation can lead to frame damage or jack failure, so if in doubt, hire a professional.
What maintenance do 6 point leveling systems require?
Regular maintenance includes checking hydraulic fluid levels and inspecting for leaks in hoses and fittings. Electric systems may need occasional cleaning of electrical contacts and greasing of moving parts. It’s also important to keep jacks clean and free of road grime, and to retract them fully during travel to prevent damage. Most manufacturers recommend an annual inspection by a qualified technician.
How much weight can a 6 point leveling system lift?
Capacity varies by model. Per-jack ratings range from 7,000 lbs to 12,000 lbs. The total lift capacity depends on the number of jacks and the system’s design. For example, a system with 10,000 lb per jack can theoretically lift 60,000 lbs, but in practice, the system is limited by the trailer’s GVWR and the pump’s hydraulic pressure. Always choose a system with a per-jack capacity that exceeds your trailer’s weight on each corner.
Are 6 point leveling systems compatible with all fifth wheel frames?
Most 6 point systems are designed to fit standard fifth wheel frames, but compatibility depends on frame width, spacing, and existing mounting points. Some systems offer universal brackets, while others require custom mounting. It’s essential to check the manufacturer’s fitment guide and measure your frame before purchasing. Some older or custom-built trailers may require modification.
Our Verdict
After researching and comparing specifications and owner feedback, our top pick is the Lippert Ground Control 6.0 for its proven reliability, fast auto-leveling, and strong aftermarket support. For owners of heavy fifth wheels, the MORryde Step Above is the runner-up, offering higher capacity and a manual backup. Choose based on your trailer’s weight, budget, and comfort with installation complexity.
More Wheels Guides
Video Guide
Video: Related tutorial from YouTube