A rear view mirror cell phone holder solves a problem most dashboard and vent mounts cannot: it puts your screen high and near your natural sightline, so a quick glance at navigation barely takes your eyes off the road. By clamping to the bar behind your mirror, these mounts also keep your dash clear, your vents unblocked, and your windshield free of suction cup marks. For drivers who use their phone as a primary GPS or rideshare display, this mounting position is genuinely one of the safest and most comfortable.
We looked at the rear view mirror mounts buyers actually search for and clamp onto real cars every day, then judged each one on the things that matter in this category: clamp grip on the mirror bar, vibration control on rough roads, how far the swing arm reaches toward the driver, and whether it can hold a large phone in a thick case. Here are the seven that earned a spot, ranked best first.
| Photo | Product | Score | Buy |
|---|---|---|---|
 |
iOttie Easy One Touch 5 Rear View Mirror Mount Best Overall One-touch spring lock cradle, telescoping arm, fits phones up to about 3.5 inches wide |
9.5 | 🛒 Check Price |
 |
VICSEED Rear View Mirror Phone Holder Best Heavy-Duty Grip Wide adjustable clamp, four-corner hooks, holds phones roughly 4 to 7 inches wide in cases |
9.3 | 🛒 Check Price |
|
APPS2Car Rear View Mirror Phone Holder Best Adjustable Arm 360-degree dual ball joints, extendable arm, fits phones up to about 7 inches |
9.1 | 🛒 Check Price |
|
Macally Rearview Mirror Phone Holder Best for Large Phones Extra-wide spring cradle, telescoping neck, accommodates phones up to about 4.4 inches wide |
8.9 | 🛒 Check Price |
 |
WeGuard Rear View Mirror Phone Holder Best Everyday Value Adjustable side clamp arms, short stable neck, fits phones around 4 to 6.5 inches wide |
8.6 | 🛒 Check Price |
|
Miracase Rear View Mirror Phone Holder Best Compact Design Slim foldable cradle, low-profile clamp, fits phones up to about 3.7 inches wide |
8.4 | 🛒 Check Price |
|
AINOPE Rear View Mirror Phone Holder Best No-Slip Clamp Strong mirror clamp with anti-slip pads, swivel head, fits phones around 4 to 6.7 inches wide |
8.2 | 🛒 Check Price |
1. iOttie Easy One Touch 5 Rear View Mirror Mount: Best Overall
iOttie built its reputation on the Easy One Touch cradle, and the rear view mirror version brings that same satisfying one-press grip to a position right beside your mirror. You push your phone against the trigger foot, the side arms snap closed, and a single button on the back pops them open when you are done. After clamping it to the mirror bar, the telescoping arm lets you pull the screen back toward your face and tilt it to kill glare, which is exactly the kind of adjustability that makes a mirror mount worth using over a vent clip.
The honest weakness is bulk. This is a substantial mount, and on a small mirror in a compact car the cradle can sit close enough to nibble at the edge of your reflection, so you may need to nudge your mirror slightly after mounting. The clamp also expects a standard factory mirror stem, so drivers with very wide or aftermarket mirrors should measure first. For everyone else, the combination of one-touch convenience, a stable arm, and proven durability makes this the mount to beat.
- One-touch spring lock arms close around the phone with a single press and release with one button
- Telescoping and pivoting arm pulls the screen toward the driver and angles it freely
- Mirror clamp with rubber padding grips the bar behind most factory mirrors
Pros: Genuinely one-handed operation that is easy to do at a red light; Strong, well-damped arm holds large phones with minimal screen bounce; Trusted brand with consistent build quality across years of mounts
Cons: The cradle and arm together can crowd a small mirror on compact cars; Mirror clamp does not fit oversized aftermarket or wide rectangular mirrors
2. VICSEED Rear View Mirror Phone Holder: Best Heavy-Duty Grip
VICSEED leans hard into security, and it shows. Instead of side-only arms, this holder cradles your phone with four corner hooks that you tighten down, so once it is in place the phone simply does not budge over potholes or speed bumps. The clamp that grips the mirror bar is reinforced and opens wide, which means it bites onto thicker mirror stems that defeat some lighter mounts. Pair that with a long, freely rotating ball joint and you can drag the screen well into the driver line of sight, a real plus for taller drivers in larger vehicles.
That rock-solid grip comes at the cost of speed. Because you are tightening corner hooks rather than triggering a spring, getting your phone in and out is a deliberate, two-handed affair rather than the one-touch snap of the iOttie. The body is also on the larger side, so on a compact car it can shade a bit more of your mirror. If you drive trucks, SUVs, or rough roads and want the most planted hold here, the trade is well worth it.
- Four-corner clamping hooks secure the phone at all edges for a very firm hold
- Long ball-jointed neck reaches far toward the driver and rotates a full range
- Reinforced mirror clamp opens wide to fit thicker mirror bars
Pros: Among the most secure holds in the category, even on rough roads; Generous reach and rotation suit tall drivers and big phones; Sturdy plastics and metal joints feel built to last
Cons: Tightening all four hooks takes two hands and is not a quick grab and go; Larger footprint can block more of a small mirror than slimmer mounts
3. APPS2Car Rear View Mirror Phone Holder: Best Adjustable Arm
APPS2Car is a dedicated mount brand, and this model is all about getting the angle exactly right. The arm uses two separate 360-degree ball joints, so you can swing the phone in, twist it to landscape for navigation, and tilt it to dodge sun glare without fighting the mount. The arm also extends, which lets short and tall drivers alike find a comfortable distance from the screen. Loading the phone is easy because the side grips are spring-loaded, so you spread them, drop the phone in, and let them close.
The flexibility that makes this mount so likeable is also its one soft spot. With two ball joints carrying the weight, a heavy phone in a bulky case can cause a slow droop over weeks of use, meaning you occasionally retighten the joints. Fully extended on a washboard road, the longer arm also lets the screen wobble a touch more than a short, stubby mount would. Snug the joints down and keep the arm reasonably retracted, though, and it stays put nicely.
- Dual 360-degree ball joints allow nearly any viewing angle, portrait or landscape
- Extendable arm lengthens to bring the screen closer or tuck it back as needed
- Spring-loaded side grips expand to hold large phones in protective cases
Pros: Exceptional range of motion thanks to two independent pivots; Spring side grips make insertion and removal quick with one hand; Slim clamp fits a good range of factory mirror bars
Cons: Two ball joints can slowly sag under a heavy phone over time; Extended fully, the arm transmits a little more vibration on bad roads
4. Macally Rearview Mirror Phone Holder: Best for Large Phones
If you carry one of the largest phones on the market and wrap it in a thick protective case, fit is everything, and Macally builds this mount with extra room in mind. The spring-loaded cradle opens wide enough to take plus-size handsets without forcing, and the bottom foot supports the weight so the grip does not have to do all the work. A telescoping neck and pivoting head let you pull the screen toward you and angle it, covering the basics of a good mirror mount without overcomplicating things.
The flip side of all that capacity is that the cradle can look and feel oversized when a more compact phone sits in it, with arms reaching past the phone edges. The head pivot, like many in this class, can also work slightly loose over time and benefit from a periodic tighten. Those are minor gripes against a mount that nails the one job buyers with big phones care about most, which is a confident, no-drama hold.
- Extra-wide cradle swallows the biggest plus-size phones even in chunky cases
- Telescoping neck and pivot head dial in distance and angle
- Padded mirror clamp protects the bar and dampens minor buzz
Pros: Roomy cradle is ideal for max-size phones and rugged cases; Simple, reliable spring grip with no fiddly hooks; Long-standing accessory brand with solid support
Cons: Generous cradle looks oversized when holding a smaller phone; Pivot can loosen slightly and need an occasional snug-up
5. WeGuard Rear View Mirror Phone Holder: Best Everyday Value
WeGuard keeps things refreshingly straightforward, and that focus pays off in stability. The neck is short and stiff rather than long and telescoping, so the phone sits close to the mirror bar and barely bounces even on rougher pavement. You set the clamp arms to your phone width once, snug them down, and from then on it is a confident hold. Installation on the mirror is a simple two-step clamp that takes well under a minute and needs no tools, which makes this an easy first mirror mount for anyone.
The compromise built into that short, solid neck is reach. Because the arm does not extend far, the phone stays near the mirror rather than coming out toward your hand, so very tall drivers or those who like the screen close may want a longer-arm option instead. Adjusting the clamp to a new phone width is also a manual step rather than an automatic spring. For a stable, fuss-free mount that simply works day in and day out, though, it delivers strong qualitative value.
- Adjustable clamp arms tighten to the exact width of your phone for a snug hold
- Short, stiff neck keeps vibration low without much wobble
- Easy two-step mirror clamp installs in well under a minute
Pros: Stable, low-bounce hold thanks to the short neck design; Quick, tool-free install on the mirror bar; Reliable grip for the kind of mount most drivers actually need
Cons: Limited arm reach means it sits closer to the mirror than long-arm rivals; Manual width adjustment is less convenient than a one-touch spring
6. Miracase Rear View Mirror Phone Holder: Best Compact Design
Drivers of compact cars often find that big mirror mounts steal too much of their reflection, and Miracase answers that with a deliberately slim design. The body is low profile, the arms fold away when empty, and silicone pads cushion the contact points, so the whole thing stays unobtrusive both visually and physically. Clamped onto the mirror bar, it blocks very little of your view, which is exactly what you want when mirror real estate is tight. It is an easy mount to live with and looks neat when no phone is loaded.
Keeping the footprint small does mean giving up some capacity and reach. The cradle is comfortable for standard and smaller phones but gets tight around the very largest handsets in rugged cases, so big-phone owners should look at the Macally or VICSEED instead. The arm is also short, so the screen sits close to the mirror rather than reaching toward you. Within its lane, a small, clean mount that respects a small mirror, it is a smart and likeable choice.
- Slim, low-profile body blocks very little of the mirror reflection
- Foldable arms tuck away when no phone is mounted
- Soft silicone pads protect both the phone and the mirror bar
Pros: Compact shape barely intrudes on the mirror, great for small cars; Tidy folding design looks clean when not in use; Gentle pads keep phone and mirror scratch free
Cons: Smaller cradle is tight for the very largest phones in thick cases; Shorter arm offers limited reach toward the driver
7. AINOPE Rear View Mirror Phone Holder: Best No-Slip Clamp
A mirror mount is only as good as its clamp, and AINOPE concentrates on that connection. The clamp jaws are lined with grippy anti-slip pads that resist the slow creep down the mirror bar that plagues weaker mounts, and the opening is wide enough to fit a good spread of factory mirror stems. Once it is locked on, a swivel head lets you flip the phone between portrait and landscape, which is handy when you switch from a music app to full-screen navigation. For drivers whose previous mount kept drifting, this is the reassuring fix.
Where it gives a little ground to the leaders is in the phone-side hardware and finish. The side grips need a deliberate, firm push to lock fully around the phone, so it is not quite as easy to load as a spring-triggered cradle, and the plastics, while sturdy, do not feel as refined as the iOttie or VICSEED. Those are fair trade-offs for a mount whose core promise, a clamp that simply will not slip, it keeps very well.
- Grippy anti-slip clamp pads resist sliding along the mirror bar
- Swivel head rotates between portrait and landscape easily
- Wide clamp opening accommodates a broad range of mirror stems
Pros: Clamp stays put and resists creeping down the mirror bar; Easy portrait to landscape rotation for navigation; Broad mirror-bar compatibility out of the box
Cons: Side grips need a firm push to lock fully onto the phone; Plastic finish feels a little less premium than top picks
Frequently Asked Questions
Will a rear view mirror phone holder block my view of the mirror?
A well-chosen mount should block very little of your reflection because the phone hangs to the side of or just below the mirror rather than across it. Slim models like the Miracase are designed specifically for small mirrors and barely intrude, while larger four-corner mounts take up more space. The key is to mount the phone, then readjust your mirror, and on most cars you will still have a full, clear view behind you. If you drive a compact car with a small mirror, lean toward a low-profile design.
Are these mirror mounts safe and legal to use?
Mounting your phone beside the rear view mirror is widely considered one of the safer positions because the screen sits high and close to your natural sightline, so glancing at navigation takes your eyes off the road only briefly. That said, distracted driving and phone-handling laws vary by state and country, and some jurisdictions restrict where anything can be attached near the windshield. The mount itself is legal hardware, but you are responsible for using your phone hands-free and for checking your local rules on screen placement and handling while driving.
Will a mirror mount fit my car and my phone with a case on?
Most of these clamps are built for standard factory mirror stems and fit the large majority of cars, but very wide or aftermarket mirrors can be too thick, so check the clamp opening if your mirror is unusual. For the phone side, look at the listed grip width: standard phones fit nearly every mount, but the largest plus-size phones in thick rugged cases need a roomy cradle like the Macally or a wide four-corner design like the VICSEED. When in doubt, measure your phone width with the case on and compare it to the holder spec.
Will the phone shake or fall off on bumpy roads?
Vibration control comes down to two things: how firmly the cradle grips the phone and how short and stiff the arm is. Short-neck mounts like the WeGuard keep the phone close to the mirror and bounce the least, while long telescoping arms give you more reach but can wobble more when fully extended. Four-corner clamps such as the VICSEED hold the phone most securely against potholes. A quality mirror mount will not drop your phone in normal driving, but tighten every joint properly and avoid over-extending the arm on rough roads.
Can I use wireless charging or run a cable with a mirror mount?
Most rear view mirror holders in this guide are passive cradles without built-in charging, so you power your phone with a regular cable run down to a charging port. That keeps the mount lighter and simpler, and most cradles leave the charging port accessible at the bottom. Dedicated wireless charging mirror mounts do exist, but they are heavier and add a clamping arm motor or coil, which can strain a mirror bar. For most drivers a passive mount plus a tidy cable is the more reliable everyday setup.
Our Verdict
For most drivers, the iOttie Easy One Touch 5 Rear View Mirror Mount is the one to buy: its one-touch spring cradle, well-damped telescoping arm, and proven build quality make it the most convenient and dependable mirror mount here, which is why it tops our list. If you drive a truck or SUV on rough roads and want the most planted, no-budge hold for a big phone, the VICSEED Rear View Mirror Phone Holder is the runner up, trading quick loading for a four-corner grip that simply will not let go. Match the mount to your mirror size and phone, and either one will keep your navigation safely in your sightline.
More Phone Mounts Guides
Video Guide
Video: Related tutorial from YouTube